Everyone loves a good IKEA hack, like my last leather woven chair hack that you can find here. This one is much simpler. The prices of the beds at IKEA can’t be beat. This bed was $359 + tax and delivery and can be found here. For this project, I am only 1) painting and 2) tweaking the design a bit by leaving off the top cross beam. Easy!
The bed that I selected was the Gjora bed because it has a nice height off the ground (more traditional) and it is simple. It also doesn’t hurt that it ” doesn’t look like Ikea”.
The bed came in 5 thin and tall boxes that were relatively easy to wrangle into the elevator. I laid out the primary wooden pieces and immediately started to paint the exterior of the platform support and the bedposts Wimborne White from Farrow & Ball (leftover wall paint) to match our guest room trim. I quickly ran a clean towel down each piece to pick up any dust (there didn’t appear to be any).
I did not prime the pieces or do any prep work and used a brush to apply the paint. I applied the paint only to the outer surface of the support boards and painted the top edge AFTER the bed was assembled. This was easier than having to hold each board on its side. It also helped to conserve paint as no edges that do not show were inadvertently painted white.
I debated setting up the bed directly onto the hardwood, but decided to lay down a basic rug to give some texture to the room and a soft place for feet to land. This rug was from Houzz and was not expensive. It can easily be changed out in the future.
After I painted the bed, I left off the top cross-bar that the Gjora features because I felt like it appeared too high and a bit strange. It also gave me less to paint! I will add finials to these posts once I identify which finials are best.
I will add additional pillows once they arrive, finials on the bed posts and a quilt to the foot of the bed. Will post additional pictures once it is complete.
The total cost of this bed was ~$980 start to finish, including the mattress from Tuft & Needle and the frame from Ikea.
It has been too long since I’ve written about this little gem of a guest bath. Since then, there has been a ton of progress! As a reminder of where we started here is a peek back at the listing photo:
What did we save: we saved the 1) Duravit 1930s pedestal sink, 2) subway tiles
What did we add: we added the 1) Kohler Underscore Bathtub, 2) Ming herringbone Ann Sacks floors, 3×12 blocks, 3) molding to update the subway look including baseboards, finishing molding and a rope detail, 4) updated Grohe fixtures on everything including the sink, 5) Kohler Verdura LED medicine cabinet (built in, for storage). Here is where we are today with some work still remaining:
While initially we wanted to try to save the toilet, we ended up needing to replace it anyways since the original wasn’t the appropriate rough-in size for the space. Compare the traditional Kohler above (10″ rough-in) with the Duravit 1930s style toilet that we replaced, below.
The ming tiles (custom cut 3×12 by Ann Sacks) made a huge difference in overhauling the look and feel of the space.
The rope and finishing molding in addition to the baseboards finished up the subway that was already in place.
There are still a few details left before this bathroom is complete including painting, updating the can lights and potentially adding glass sliding doors to the shower / bath.
The Ann Sacks custom floors will be delivered the first week of May. It is going to be a long haul waiting for them this month! Until then, the floors are making their way on a ship from Hong Kong. The finished product with 3″ overage for the master bath floorpan is as follows:
The orientation is such that the entry to the bathroom is actually at the top right of the image, with the first pedestal sink in that first jog out, toilet at bottom right, second pedestal bottom left and shower top left. The fixtures will all be brass Waterworks and we will be installing two of my favorite Kohler LED Verdura medicine cabinets for great lighting and even better storage.
The den has been painted Railings by Farrow & Ball. It is a sophisticated color and makes for a cozy room! A flashback to where we started:
And, where we are today. A completely refreshed base for what will be a den.
The choice of color was an easy one, working with the fireplace surround, but I was in suspense leading up to the big reveal and wasn’t disappointed. Walter and his team from Tapia’s Works did an impeccable job.
You may recall that a prior owner had painted around the mirror, leaving the space beneath a surprising shade of pink! We cleaned that up this time around.
A sprayed finish is the way to go for smooth surfaces like doors, and detailed surfaces like molding, with a brush sprinkled in as needed for more detailed trim. I must say that I am a true Farrow & Ball subscriber after seeing the finish compared to the prior paint.
We still need to identify a good spot to hang a television and make a decision on drapes.
Now that the base is complete I am considering furniture ideas and searching for the perfect plaid rug. Let me know if you have any ideas!
The custom floors have been in production for approx 4 weeks now and I just got my first peek at them! I misunderstood the timeline and had thought they would be delivered in 4-6 weeks, but both the production process AND shipping EACH take 4-6 weeks. Needless to say, the floors are not here yet!
As a reminder, the rendering of the stones we selected, for our specific floorplan, looked like this:
Production just came back with a swatch of floor for approval before they start to produce the entire footprint. Here it is:
It has a nice neutral look to it, while being bold and forward. It will go really well in this traditional home. The only stone that is missing from this swatch is the rubicon black (stripe), but otherwise this is the finished product.
I’m very excited for these floors to be installed.
Remember the old Ming Circus wallpaper in the entry? It has been transformed with Gucci Herbarium and it was fabulous, until I noticed a big error. Can you spot it?
No, it’s not that the paper is missing over the door. The installers haven’t gotten to that piece yet.
Notice the butterflies in the pattern that are flying upside down? <cringe>. Gucci actually rolled their paper upside down. Typically the end of the roll is the top of the wall. Typically the wallpaper rolls down the wall. However, in this case, the top of the roll was the bottom of the wall (not standard). It was not my installers mistake and Gucci is going to fix this issue with their manufacturer. I guess that is what happens when you are an early adopter? Unfortunately we will have to strip the paper and re-wallpaper the entry. Thankfully it was not a huge space and thankfully Tapia’s Works is fantastic and is doing this again for me. Needless to say, if anyone is interested in using this paper be extra careful about reviewing your roll and the orientation. It is possible that your paper too will be rolled upside down such that the top of the roll is the bottom of the wall…